Watercolor & Ink, Photography, Electrical Engineering, LEGO, Plushie Demons, Circuit-Bending, etc.
20100816
MicMask
(still using my older camera, sorry for the crappy pictures)
This is an amplified microphone-mask with volume and gain controls. I use it while drumming in a noise trio called Dos Honchos.

It contains 7 identical headphone speakers, two pots, a switch, an output jack, an IC and a battery clip; surprisingly without being cumbersome.
Screaming my face off while drumming has never been easier.
20100730
Patches
Apologies on the late update and crappy photos, my camera hasn't been working (stuck using my old one for now).
Be it for nostalgia or just for fun, I wear a patch vest pretty often. All of my patches are hand-made using one of my two methods. For the first method I take black canvas fabric, draw a general idea with whiteout pens, add detail with clear acrylic, and use black sharpie paint-pens to clean up any mistakes. Finally, I add a few coats of matte, clear acrylic spray paint. Method two is a little more detailed and better for the more complex patches (Nylithia, Dethklok, etc).
Method two involves Canvas Paper, Clear Matte Acrylic Spray, Ultra-Fine Micron Pens, Sharpie Paint Pens, Acrylic Paint, an inkjet printer, and other various tools. First, cut some canvas paper as long as you want, but only 8.5 inches wide (unless your printer can print wider). Then start a PSD, with a width of 8" and a length .5" less than the sheet. Add the logos you want to the PSD with proper spacing. Tell it to print at the bottom of the sheet; feeding thick canvas paper can cause issues, it's best to have more room for error at the start of the sheet. Also, be sure to print on the softer, absorbent side of the paper; the back is typically glossy. Let the printed sheet absorb/dry for 15min, then take it outside and apply a coat of clear acrylic spray. After this dries, you can start filling in the black details with your pens, and larger areas with paint. I use different balances of pen and paint for different patches. Let the paint dry, and then coat with a few more layers of clear acrylic spray.
Above is my favorite patch. The amazing artist Lara Hilgemann drew this for me (freehand in about 2 minutes).
As an apology for nearly missing my (self-appointed) deadline on this post, here are some doodles:
Be it for nostalgia or just for fun, I wear a patch vest pretty often. All of my patches are hand-made using one of my two methods. For the first method I take black canvas fabric, draw a general idea with whiteout pens, add detail with clear acrylic, and use black sharpie paint-pens to clean up any mistakes. Finally, I add a few coats of matte, clear acrylic spray paint. Method two is a little more detailed and better for the more complex patches (Nylithia, Dethklok, etc).As an apology for nearly missing my (self-appointed) deadline on this post, here are some doodles:
20100619
VirtualDJ
Lately I've been playing around with a pirated copy of VirtualDJ and it is awesome! It's incredibly fun and surprisingly easy to use.Here's a mix of some stuff I made while messing around in it:
VDJ Megamix by Subbs
PS: This track uses a TON of copyrighted material:
Jurassic 5 - Break
Karen O & Peaches - Backass
Massive Attack - Teardrop (feat. Portishead)
Prefuse 73 - Busy Signal
King Bee - Must Be The Music (Frisco Disco Mix)
Vampire Weekend - The Kids Don't Stand a Chance
Sarai - Ladies - Viro & Rob Analyze Remix
Tim & Eric - Beaver Boys
Tim & Eric - Big Ben 2 (A to Z)
2Pac - Stay True
Nintendo - Tetris Theme
Three Six Mafia - Stay Fly
Yeah Yeah Yeahs - Y Control
Vampire Weekend - A-Punk
Drumsound & Bassline Smith - Cold Turkey (G Dub, Beat City VIP)
Liz Phair - Flower
Machine Drum - Def In It
20100530
Ungodly Hybrid
Like I said, I will hold myself to posting at least once a month! Here is something I made for a friend's birthday.

All I did was take an existing toy, add a better speaker, bypassing output jack, and in place of the pitch resistor, I put a 10m pot with a 10uF cap parallel, with a cutoff switch and touch points as well. I also did some cosmetic modifications. The result is pretty bizzarre and I have to say, I'm quite pleased with it. Enjoy:
PS: Here is a preview of the official schematic for Digisynth v3. I still have to draw the 16-step sequencer, labels for everything, and the LFO cutoff switches.
All I did was take an existing toy, add a better speaker, bypassing output jack, and in place of the pitch resistor, I put a 10m pot with a 10uF cap parallel, with a cutoff switch and touch points as well. I also did some cosmetic modifications. The result is pretty bizzarre and I have to say, I'm quite pleased with it. Enjoy:
PS: Here is a preview of the official schematic for Digisynth v3. I still have to draw the 16-step sequencer, labels for everything, and the LFO cutoff switches.
20100427
Inverter-Based Synths
I have mentioned before that my synths are inverter-based. Now this makes them "digital" rather than "analog" op-amp based synths. The great thing about inverter synths is how easy it is for beginners to mod them and bend them. They are low voltage, and incredibly versatile. In all my bending and re-wiring of inverters, I still haven't managed to ruin any parts like I used to with basic circuit-bending.
I'm currently working on some Jar Monsters, a few songs, updating my recording studio, transcribing the full digisynth schematic to photoshop, and a commissioned digisynth v3 for a friend. Recap: v0 was the OrcaSynth, v1 was the DigiSynth, v2 was the SynthZilla, and v3 is in the works with many improvements over v2.
Also, here is something I drew on harmony:
By the way, I will hold myself to posting at least once a month!
[super-secret song at the end]
Beavis Audio Research has a great page on these types of synths here: beavisaudio.com/Projects/CMOS_Synthesizers The above video involves my digisynth v1, beavis audio's Heterodyne Space Explorer (a quad-oscillator with starve), and a "Mr Rogers in my Pocket." The starve and quad-osc combined with an input patched in makes some great digital, squeaky distortion. Almost akin to a high-gain bitcrusher.I'm currently working on some Jar Monsters, a few songs, updating my recording studio, transcribing the full digisynth schematic to photoshop, and a commissioned digisynth v3 for a friend. Recap: v0 was the OrcaSynth, v1 was the DigiSynth, v2 was the SynthZilla, and v3 is in the works with many improvements over v2.
Also, here is something I drew on harmony:
By the way, I will hold myself to posting at least once a month!
Subscribe to:
Posts (Atom)